Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,1 @@
+SUBDIRS = basis cints dft intcca intv3 mbpt mbptr12 oint3 psi scf wfn
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/basis/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/basis/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/basis/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,59 @@
+LIBSCBASISSOURCES = \
+		aotoso.cc cartiter.cc dercent.cc distshpair.cc extent.cc files.cc gaussbas.cc gaussbaval.cc gaussshell.cc gaussshval.cc gpetite.cc integral.cc obint.cc orthog.cc petite.cc shellrot.cc sobasis.cc sointegral.cc symmint.cc tbint.cc transform.cc
+
+LIBSCBASISHEADERS = \
+		basis.h cartiter.h dercent.h distshpair.h extent.h files.h gaussbas.h gaussshell.h gpetite.h integral.h obint.h orthog.h petite.h shellrot.h sobasis.h sointegral.h symmint.h tbint.h transform.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCbasis.la
+libSCbasis_la_includedir = $(includedir)/chemistry/qc/basis
+libSCbasis_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCbasis_la_LDFLAGS = $(AM_LDFLAGS)
+libSCbasis_la_LIBADD =
+
+nobase_libSCbasis_la_include_HEADERS = ${LIBSCBASISHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCbasis_la_SOURCES = ${LIBSCBASISSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCbasis_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCbasis_libincludedir = $(libdir)/chemistry/qc/basis/include
+#nodist_libSCbasis_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+BASISTESTS = \
+        btest
+
+check_PROGRAMS += $(BASISTESTS)
+noinst_PROGRAMS += $(BASISTESTS)
+
+BASISLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCbasis.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+btest_SOURCES = btest.cc
+btest_LDADD = \
+        $(BASISLIBS)
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/cints/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/cints/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/cints/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,60 @@
+LIBSCCINTSSOURCES = \
+		cints.cc comp_eri.cc comp_grt.cc edipole.cc equadrupole.cc eri.cc fjt.cc grt.cc hcore.cc int1e.cc int2e.cc kinetic.cc nuclear.cc obintcints.cc obosrr.cc overlap.cc permute2e.cc primpairs.cc shellpairs.cc storage.cc tbintcints.cc tform.cc
+
+LIBSCCINTSHEADERS = \
+		cartit.h cints.h eri.h eri_quartet_data.h fjt.h grt.h grt_quartet_data.h int1e.h int2e.h linkage.h macros.h obintcints.h primpairs.h shellpairs.h static.h storage.h tbintcints.h tform.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCcints.la
+libSCcints_la_includedir = $(includedir)/chemistry/qc/cints
+libSCcints_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCcints_la_LDFLAGS = $(AM_LDFLAGS)
+libSCcints_la_LIBADD =
+
+nobase_libSCcints_la_include_HEADERS = ${LIBSCCINTSHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCcints_la_SOURCES = ${LIBSCCINTSSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCcints_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCcints_libincludedir = $(libdir)/chemistry/qc/cints/include
+#nodist_libSCcints_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+CINTSTESTS = \
+        cintstest
+
+check_PROGRAMS += $(CINTSTESTS)
+noinst_PROGRAMS += $(CINTSTESTS)
+
+CINTSLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCcints.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+cintstest_SOURCES = cintstest.cc
+cintstest_LDADD = \
+        $(CINTSLIBS)
+
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/dft/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/dft/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/dft/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,64 @@
+LIBSCDFTSOURCES = \
+		clks.cc functional.cc hsosks.cc integrator.cc tmplinst.cc uks.cc
+
+LIBSCDFTHEADERS = \
+		clks.h clkstmpl.h functional.h hsosks.h hsoskstmpl.h integrator.h linkage.h uks.h ukstmpl.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCdft.la
+libSCdft_la_includedir = $(includedir)/chemistry/qc/dft
+libSCdft_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCdft_la_LDFLAGS = $(AM_LDFLAGS)
+libSCdft_la_LIBADD =
+
+nobase_libSCdft_la_include_HEADERS = ${LIBSCDFTHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCdft_la_SOURCES = ${LIBSCDFTSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCdft_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCdft_libincludedir = $(libdir)/chemistry/qc/dft/include
+#nodist_libSCdft_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+DFTTESTS = \
+        dfttest \
+	lebedev
+
+check_PROGRAMS += $(DFTTESTS)
+noinst_PROGRAMS += $(DFTTESTS)
+
+DFTLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCdft.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+dfttest_SOURCES = dfttest.cc
+dfttest_LDADD = \
+        $(DFTLIBS)
+
+lebedev_SOURCES = lebedev.cc
+lebedev_LDADD = \
+        $(DFTLIBS)
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/intcca/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/intcca/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/intcca/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,44 @@
+LIBSCINTCCASOURCES = \
+		int1e.cc int2e.cc intcca.cc obintcca.cc tbintcca.cc
+
+LIBSCINTCCAHEADERS = \
+		cartit.h int1e.h int2e.h intcca.h LIBS.h linkage.h macros.h obintcca.h tbintcca.h tform.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCintcca.la
+libSCintcca_la_includedir = $(includedir)/chemistry/qc/intcca
+libSCintcca_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCintcca_la_LDFLAGS = $(AM_LDFLAGS)
+libSCintcca_la_LIBADD =
+
+nobase_libSCintcca_la_include_HEADERS = ${LIBSCINTCCAHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCintcca_la_SOURCES = ${LIBSCINTCCASOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCintcca_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCintcca_libincludedir = $(libdir)/chemistry/qc/intcca/include
+#nodist_libSCintcca_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/intv3/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/intv3/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/intv3/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,64 @@
+LIBSCINTV3SOURCES = \
+		array.cc atominfo.cc bounds.cc build2e.cc comp1e.cc comp2e3c.cc comp2e.cc fjt.cc init2e.cc int1e.cc int2e.cc intv3.cc obintv3.cc offsets.cc print2e.cc shift2e.cc storage.cc store.cc tbintv3.cc tformv3.cc
+
+LIBSCINTV3HEADERS = \
+		array.h cartitv3.h fjt.h flags.h int1e.h int2e.h intv3.h macros.h obintv3.h storage.h tbintv3.h tformv3.h types.h utils.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCintv3.la
+libSCintv3_la_includedir = $(includedir)/chemistry/qc/intv3
+libSCintv3_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCintv3_la_LDFLAGS = $(AM_LDFLAGS)
+libSCintv3_la_LIBADD =
+
+nobase_libSCintv3_la_include_HEADERS = ${LIBSCINTV3HEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCintv3_la_SOURCES = ${LIBSCINTV3SOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCintv3_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCintv3_libincludedir = $(libdir)/chemistry/qc/intv3/include
+#nodist_libSCintv3_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+INTV3TESTS = \
+	fjttest \
+	inttest
+
+check_PROGRAMS += $(INTV3TESTS)
+noinst_PROGRAMS += $(INTV3TESTS)
+
+INTV3LIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCintv3.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+fjttest_SOURCES = fjttest.cc
+fjttest_LDADD = \
+        $(INTV3LIBS)
+
+inttest_SOURCES = inttest.cc
+inttest_LDADD = \
+        $(INTV3LIBS)
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/mbpt/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/mbpt/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/mbpt/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,59 @@
+LIBSCMBPTSOURCES = \
+		bzerofast.c cscphf.cc csgmat.cc csgrad34qb.cc csgrad.cc csgrade12.cc csgrads2pdm.cc hsosv1.cc hsosv1e1.cc hsosv2.cc hsosv2lb.cc mbpt.cc mp2extrap.cc util.cc
+
+LIBSCMBPTHEADERS = \
+		bzerofast.h csgrad34qb.h csgrade12.h csgrads2pdm.h hsosv1e1.h linkage.h mbpt.h mp2extrap.h util.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCmbpt.la
+libSCmbpt_la_includedir = $(includedir)/chemistry/qc/mbpt
+libSCmbpt_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCmbpt_la_LDFLAGS = $(AM_LDFLAGS)
+libSCmbpt_la_LIBADD =
+
+nobase_libSCmbpt_la_include_HEADERS = ${LIBSCMBPTHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCmbpt_la_SOURCES = ${LIBSCMBPTSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCmbpt_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCmbpt_libincludedir = $(libdir)/chemistry/qc/mbpt/include
+#nodist_libSCmbpt_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+MBPTTESTS = \
+	mbpttest
+
+check_PROGRAMS += $(MBPTTESTS)
+noinst_PROGRAMS += $(MBPTTESTS)
+
+MBPTLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCmbpt.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+mbpttest_SOURCES = mbpttest.cc
+mbpttest_LDADD = \
+        $(MBPTLIBS)
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/mbptr12/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/mbptr12/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/mbptr12/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,60 @@
+LIBSCMBPTR12SOURCES = \
+		compute_a_gebc_abs1.cc compute_a_gebc.cc compute_a_gebc_vbs.cc compute_amps.cc compute_energy_a.cc compute_ijxy.cc compute_ikjy.cc compute_ixjy.cc compute_vxb_a_asymm.cc compute_vxb_a_symm.cc coulomb.cc dualbasis_mp2.cc ebc_contribs.cc exchange.cc fock.cc gbc_contribs.cc mbptr12.cc moindexspace.cc mp2r12_energy.cc multipole_ints.cc pairiter.cc r12_amps.cc r12ia.cc r12ia_memgrp.cc r12ia_mpiiofile.cc r12ia_node0file.cc r12int_eval.cc ri_basis.cc svd.cc transform_123inds.cc transform_12inds.cc transform_13inds.cc transform_factory.cc transform_ijxy.cc transform_ikjy.cc transform_ixjy.cc transform_tbint.cc twobodygrid.cc vxb_eval_info.cc
+
+LIBSCMBPTR12HEADERS = \
+		blas.h lapack.h linearr12.h linkage.h mbptr12.h moindexspace.h mp2r12_energy.h pairiter.h print_scmat_norms.h r12_amps.h r12ia.h r12ia_memgrp.h r12ia_mpiiofile.h r12ia_node0file.h r12int_eval.h svd.h transform_123inds.h transform_12inds.h transform_13inds.h transform_factory.h transform_ijxy.h transform_ikjy.h transform_ixjy.h transform_tbint.h twobodygrid.h vxb_eval_info.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCmbptr12.la
+libSCmbptr12_la_includedir = $(includedir)/chemistry/qc/mbptr12
+libSCmbptr12_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCmbptr12_la_LDFLAGS = $(AM_LDFLAGS)
+libSCmbptr12_la_LIBADD =
+
+nobase_libSCmbptr12_la_include_HEADERS = ${LIBSCMBPTR12HEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCmbptr12_la_SOURCES = ${LIBSCMBPTR12SOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCmbptr12_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCmbptr12_libincludedir = $(libdir)/chemistry/qc/mbptr12/include
+#nodist_libSCmbptr12_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+MBPTR12TESTS = \
+        mbptr12test
+
+check_PROGRAMS += $(MBPTR12TESTS)
+noinst_PROGRAMS += $(MBPTR12TESTS)
+
+MBPTR12LIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCmbptr12.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+mbptr12test_SOURCES = mbptr12test.cc
+mbptr12test_LDADD = \
+        $(MBPTR12LIBS)
+
+ 
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/oint3/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/oint3/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/oint3/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,44 @@
+LIBSCOINT3SOURCES = \
+		build.cc i0100AB.cc i0100.cc i0101AB.cc i0101.cc i0111AB.cc i0111.cc i0200AB.cc i0200.cc i0201AB.cc i0201.cc i0202AB.cc i0202.cc i0211AB.cc i0211.cc i0212AB.cc i0212.cc i0222AB.cc i0222.cc i0300AB.cc i0300.cc i0301AB.cc i0301.cc i0302AB.cc i0302.cc i0303AB.cc i0303.cc i0311AB.cc i0311.cc i0312AB.cc i0312.cc i0313AB.cc i0313.cc i0322AB.cc i0322.cc i0323AB.cc i0323.cc i0333AB.cc i0333.cc i1100AB.cc i1100.cc i1111AB.cc i1111.cc i1200AB.cc i1200.cc i1201AB.cc i1201.cc i1211AB.cc i1211.cc i1212AB.cc i1212.cc i1222AB.cc i1222.cc i1300AB.cc i1300.cc i1301AB.cc i1301.cc i1302AB.cc i1302.cc i1311AB.cc i1311.cc i1312AB.cc i1312.cc i1313AB.cc i1313.cc i1322AB.cc i1322.cc i1323AB.cc i1323.cc i1333AB.cc i1333.cc i2200AB.cc i2200.cc i2201AB.cc i2201.cc i2211AB.cc i2211.cc i2222AB.cc i2222.cc i2300AB.cc i2300.cc i2301AB.cc i2301.cc i2302AB.cc i2302.cc i2311AB.cc i2311.cc i2312AB.cc i2312.cc i2322AB.cc i2322.cc i2323AB.cc i2323.cc i2333AB.cc i2333.cc i3300AB.cc i3300.cc i3301AB.cc i3301.cc i3302AB.cc i3302.cc i3311AB.cc i3311.cc i3312AB.cc i3312.cc i3322AB.cc i3322.cc i3333AB.cc i3333.cc
+
+LIBSCOINT3HEADERS = \
+		build.h LIBS.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCoint3.la
+libSCoint3_la_includedir = $(includedir)/chemistry/qc/oint3
+libSCoint3_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCoint3_la_LDFLAGS = $(AM_LDFLAGS)
+libSCoint3_la_LIBADD =
+
+nobase_libSCoint3_la_include_HEADERS = ${LIBSCOINT3HEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCoint3_la_SOURCES = ${LIBSCOINT3SOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCoint3_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCoint3_libincludedir = $(libdir)/chemistry/qc/oint3/include
+#nodist_libSCoint3_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/psi/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/psi/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/psi/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,60 @@
+LIBSCPSISOURCES = \
+		psiexenv.cc psifile11.cc psiinput.cc psiwfn.cc
+
+LIBSCPSIHEADERS = \
+		linkage.h psiexenv.h psifile11.h psiinput.h psiwfn.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCpsi.la
+libSCpsi_la_includedir = $(includedir)/chemistry/qc/psi
+libSCpsi_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCpsi_la_LDFLAGS = $(AM_LDFLAGS)
+libSCpsi_la_LIBADD =
+
+nobase_libSCpsi_la_include_HEADERS = ${LIBSCPSIHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCpsi_la_SOURCES = ${LIBSCPSISOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCpsi_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCpsi_libincludedir = $(libdir)/chemistry/qc/psi/include
+#nodist_libSCpsi_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+PSITESTS = \
+        psitest
+
+check_PROGRAMS += $(PSITESTS)
+noinst_PROGRAMS += $(PSITESTS)
+
+PSILIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCpsi.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+psitest_SOURCES = psitest.cc
+psitest_LDADD = \
+        $(PSILIBS)
+
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/scf/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/scf/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/scf/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,60 @@
+LIBSCSCFSOURCES = \
+		clhf.cc clscf.cc effh.cc hsoshf.cc hsosscf.cc osshf.cc ossscf.cc scf.cc scfgradient.cc scfops.cc scfvector.cc svd.cc tchf.cc tcscf.cc tmplinst.cc uhf.cc uscf.cc
+
+LIBSCSCFHEADERS = \
+		clhf.h clhftmpl.h clscf.h effh.h gbuild.h hsoshf.h hsoshftmpl.h hsosscf.h lbgbuild.h lgbuild.h linkage.h ltbgrad.h osshf.h osshftmpl.h ossscf.h scf.h scflocal.h scfops.h tbgrad.h tchf.h tchftmpl.h tcscf.h uhf.h uhftmpl.h uscf.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCscf.la
+libSCscf_la_includedir = $(includedir)/chemistry/qc/scf
+libSCscf_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCscf_la_LDFLAGS = $(AM_LDFLAGS)
+libSCscf_la_LIBADD =
+
+nobase_libSCscf_la_include_HEADERS = ${LIBSCSCFHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCscf_la_SOURCES = ${LIBSCSCFSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCscf_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCscf_libincludedir = $(libdir)/chemistry/qc/scf/include
+#nodist_libSCscf_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+SCFTESTS = \
+        scftest
+
+check_PROGRAMS += $(SCFTESTS)
+noinst_PROGRAMS += $(SCFTESTS)
+
+SCFLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCscf.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+scftest_SOURCES = scftest.cc
+scftest_LDADD = \
+        $(SCFLIBS)
+
+
Index: ThirdParty/mpqc_open/src/lib/chemistry/qc/wfn/Makefile.am
===================================================================
--- ThirdParty/mpqc_open/src/lib/chemistry/qc/wfn/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
+++ ThirdParty/mpqc_open/src/lib/chemistry/qc/wfn/Makefile.am	(revision 00f9833f8d74abc94e5b207e00780988a1a0525b)
@@ -0,0 +1,59 @@
+LIBSCWFNSOURCES = \
+		accum.cc density.cc densval.cc eht.cc hcorewfn.cc nao.cc natorbval.cc obwfn.cc orbital.cc solvent.cc wfn.cc
+
+LIBSCWFNHEADERS = \
+		accum.h density.h eht.h linkage.h obwfn.h orbital.h solvent.h wfn.h
+
+lib_LTLIBRARIES +=
+noinst_LTLIBRARIES += libSCwfn.la
+libSCwfn_la_includedir = $(includedir)/chemistry/qc/wfn
+libSCwfn_la_CPPFLAGS = $(AM_CPPFLAGS)
+libSCwfn_la_LDFLAGS = $(AM_LDFLAGS)
+libSCwfn_la_LIBADD =
+
+nobase_libSCwfn_la_include_HEADERS = ${LIBSCWFNHEADERS}
+
+## Define the source file list for the "libexample-@MPQC_API_VERSION@.la"
+## target.  Note that @MPQC_API_VERSION@ is not interpreted by Automake and
+## will therefore be treated as if it were literally part of the target name,
+## and the variable name derived from that.
+## The file extension .cc is recognized by Automake, and makes it produce
+## rules which invoke the C++ compiler to produce a libtool object file (.lo)
+## from each source file.  Note that it is not necessary to list header files
+## which are already listed elsewhere in a _HEADERS variable assignment.
+libSCwfn_la_SOURCES = ${LIBSCWFNSOURCES}
+
+## Instruct libtool to include ABI version information in the generated shared
+## library file (.so).  The library ABI version is defined in configure.ac, so
+## that all version information is kept in one place.
+#libSCwfn_la_LDFLAGS += $(AM_LDFLAGS) -version-info $(MPQC_SO_VERSION)
+
+## The generated configuration header is installed in its own subdirectory of
+## $(libdir).  The reason for this is that the configuration information put
+## into this header file describes the target platform the installed library
+## has been built for.  Thus the file must not be installed into a location
+## intended for architecture-independent files, as defined by the Filesystem
+## Hierarchy Standard (FHS).
+## The nodist_ prefix instructs Automake to not generate rules for including
+## the listed files in the distribution on 'make dist'.  Files that are listed
+## in _HEADERS variables are normally included in the distribution, but the
+## configuration header file is generated at configure time and should not be
+## shipped with the source tarball.
+#libSCwfn_libincludedir = $(libdir)/chemistry/qc/wfn/include
+#nodist_libSCwfn_libinclude_HEADERS = $(top_builddir)/src/lib/scconfig.h
+
+WFNTESTS = \
+        wfntest
+
+check_PROGRAMS += $(WFNTESTS)
+noinst_PROGRAMS += $(WFNTESTS)
+
+WFNLIBS = \
+        libSCkeyval.la \
+        libSCgroup.la libSCwfn.la libSCclass.la \
+        libSCcontainer.la libSCref.la libSCmisc.la
+
+wfntest_SOURCES = wfntest.cc
+wfntest_LDADD = \
+        $(WFNLIBS)
+
